Serial devices are used ar ound the world as integral components of industri al automation systems. This is due in part to the fact that RS-232/422/ 485 interfaces are easy to set up and economical to use. Fo r example, the 2-wire RS-485 interface can be used to connect as many as 32 serial devices to a single half-duplex line. Sinc e the transmission distance can be up to 1200 meters, RS-485 is suitable for many factory applications. If more devices or greater distances are required, RS-485 repeaters can be used to extend the 1200 meter limit or increase the number of devi ces connected to the system.
With the “Wolverine” MCU platform, code named for its aggressive power-saving technology, TI has created the next generation of the MSP430 architecture. This new platform achieves new levels of ultra-low-power by cutting the power and energy consumption of MCUs by more than half. TI achieves the “Wolverine” platform’s impressive power gains through its new 130-nm ultra-low-leakage (ULL) process technology, integrated low-power non-volatile memory and enhanced MSP430 DNA with advanced power management and precision low-power analog. Learn More.
This application note implements the Common Public Radio Interface (CPRI) for Remote Radio Heads (RRHs). The designer can use this application note for developing CPRI-based repeater systems in point-to-point or multi-hop configurations.
This user's guide describes the operation of the evaluation module for the TPA3118D2. The manual also provides measurement data and design information including the schematic, the bill of materials (BOM), and a printed circuit board (PCB) layout.
This user's guide describes the operation of the TPA3116D2 evaluation module and provides measurement data and design information like the schematic, bill of materials, and the printed-circuit board layout.
This paper describes how to create a ZigBee Smart Energy Device using the MSP430F54xx as the host application processor to the CC2530-ZNP (ZigBee Pro Network Processor). The physical interface between the MSP430 and the CC2530-ZNP is discussed.
This user's guide contains information for the TPS54229EVM-056 evaluation module as well as for the TPS54229. It includes the performance specifications, schematic, and the bill of materials of the TPS54229EVM-056.
This reference design, PMP6306, is designed as a 18-W, non-dimmable, T8 LED lighting driver that uses the TPS92210. The driver is used for the off-line, single-stage, corrected power factor which provides a 450-mA constant current to drive 13 high-brightness (HB) LEDs series with a universal input range.