The new high-power terminal blocks from Omni Pro Electronics come with a heavy duty spring clamp for high range voltage of 300V and 600V.
Power terminals are quite a big deal when it comes to the service and installation parts. The warnings attached to these towers are not to be tempered with. There are several unfortunate incidents recorded every year that follow electrical accidents. With advancements in technology and power control alternatives these incidents can be avoided to a very huge extent.
The new EBY Electro Power Terminal Blocks from Omni Pro Electronics is touted to be an ideal solution for this application. The EB4210 high power terminal blocks consist of a heavy-duty spring clamp and are available in voltages of 300V and 600V, from 55A to 65A and with 6 to 16 AWG.
The stainless steel spring clamp system has a patented ergonomic lever design for finger-friendly, tool-free wiring. The lever actuated clamps enable reduced wiring and the mounts are angled for easy wire entry. The lever on this device is made of white UL94V-0 thermoplastic (RAL9003). The insulating body is made of Polyamide. Four solder pins per position increases mechanical strength.
The EB4210-XX-X00 is rated at 300V/55A and has a 10mm centerline spacing. The EB4210-XX-X01 is rated to 600V/65A and has a 15mm centerline spacing. Both are available with poles in various sizes and the maximum number of positions is 12. Applications include motor controls, industrial switching equipment, solar power and even marine industry.
Features
- High power block: From 300V – 600V | 55A – 65A | 6 – 16AWG
- Stainless steel spring clamp system
- Finger-Friendly Lever
- Four solder pins per position for added mechanical strength
- Angled easy wire entry
- Reduced wiring time with finger-levers
- Patented ergonomic lever design for finger-friendly, tool-free wiring
