High-performance motion tracking device that provides enhanced automotive positioning, telematics and vision systems
Here’s presenting the InvenSense IAM-20680HP, a high-performance automotive monolithic 6-axis MotionTracking sensor platform for non-safety relevant automotive applications. It includes the IAM-20680HP IMU MEMS sensor and the DK-20680HP developer kit.
The IAM-20680HP combines a 3-axis gyroscope and a 3-axis accelerometer in a thin 3 x 3 x 0.75mm (16-pin LGA) package and is automotive qualified based on AEC-Q100 Grade 2. It shares pin-to-pin and register compatibility with the full automotive non-safety product families of IAM-20680 (6-axis IMU), IAM-20380 (3-axis gyroscope) and IAM-20381 (3-axis accelerometer).
Also featured is an extended FIFO up to 4096-bytes that can lower the traffic on the serial bus interface and reduce power consumption by allowing the system processor to burst read sensor data and then go into low-power mode. Additionally, the IAM-20680HP provides industry-leading sensitivity tolerance and temperature stability in combination with proven high robustness by supporting 10,000g shock reliability.
The IAM-20680HP platform enhances a positioning system’s accuracy, enables advanced telematic features and stabilises vision system by delivering precise and reliable inertial data up to 105 degrees Celsius. It also provides:
⦁ Best-in-class low noise performance
⦁ On-chip 16-bit ADCs
⦁ A 3-axis gyroscope with a user-programmable full-scale range of ±250 dps to ±2000 dps
⦁ A 3-axis accelerometer with a user-programmable full-scale range of ±2g to ±16g.
Other features include programmable digital filters, an embedded temperature sensor, programmable interrupts and factory-calibration of both sensors, reducing production-line calibration requirements. The device features I2C and SPI serial interfaces and voltage operating range of 1.71V to 3.6V.
Main applications
⦁ Aids Navigation Systems for Dead Reckoning
⦁ Telematics
⦁ Insurance Vehicle Tracking
⦁ Accurate Location for Vehicle-to-Vehicle and Infrastructure
⦁ View Camera Stabilization and Vision Systems
⦁ Head-up display (HUD) and Augmented Reality HUD
⦁ Lift Gate Motion Detection
⦁ Car Alarm
Sensor platform solution
IAM-20680HP
- With a 6-axis integration, it enables manufacturers to eliminate the costly and complex selection, qualification and system-level integration of discrete devices, guaranteeing optimal motion performance.
- Shares pin-to-pin and register compatibility with the full automotive non-safety product family: IAM-20680, IAM-20380 and IAM-20381.
DK-20680HP
Features a single board “Out of the Box” experience, comprehensive software tools to expedite evaluation and development, and on-board embedded developer tools to help with code development.
The InvenSense IAM-20680HP and DK-20680HP developer kit are available from multiple distributors and are part of a fully compatible, multi-axis, multi-grade IMU portfolio of automotive products from TDK Corporation.
