close
close
close
Cell Phone Jammer

How to Build: Cell Phone Jammer

Cell phone jammer is an electronic device that blocks transmission of signals between a cell phone and a base station. By using the same frequency as a mobile handset, the cell phone...
16x2 lcd pinout

How 16×2 LCDs work | Build a basic 16×2 character LCD

We come across LCD displays everywhere around us. Computers, calculators, television sets, mobile phones, digital watches use some kind of display to display the time. An LCD is an electronic display...

What is an MCB?

A miniature circuit breaker (MCB) automatically switches off electrical circuit during an abnormal condition of the network means in overload condition as well as faulty condition. Nowadays we use an MCB in low...
humidity sensor

Humidity Sensor: Basics, Usage, Parameters and Applications

Sometimes, after rains, the air feels moist. The water seems to have suspended in the air. However, in certain AC’s you click some buttons and the atmosphere brightens up. How and...
GSM Module

All You Wanted to Know About GSM Module and GPRS Module

Before we get into what a GSM module is, let us get our fundamentals right and understand what GSM and GPRS are. A GSM module or a GPRS module is a chip or...
difference between m2m and iot

What are the Differences Between M2M and the IoT?

This article explains the basic difference between M2M and IoT. It will start from M2M and IoT basic principle along with its applications. M2M, or machine-to-machine, is a direct communication between devices...

IR LED | Infrared LED | Infrared Sensor

An Infrared light emitting diode (IR LED) is a special purpose LED emitting infrared rays ranging from 700 nm to 1 mm wavelength. Different IR LEDs may produce infrared light of differing wavelengths,...

Tutorial: Antenna Gain and Directivity

RF antennas or aerials do not radiate equally in all directions. It is found that any realisable RF antenna design will radiate more in some directions than others. The actual pattern...

7 Segment Display Pinout | Working Understanding of 7 Segment Display

A seven-segment display is commonly used in electronic display device for decimal numbers from 0 to 9 and in some cases, basic characters. Use of light emitting diodes (LEDs) in seven...
smps

SMPS: Basics & Working of Switched Mode Power Supply

Switch mode power supplies (SMPSs) are used in a range of applications as an efficient and effective source of power. This is in major part to their efficiency. For anybody still...

Follow our Social Channels

950,990FansLike
564FollowersFollow
22,100SubscribersSubscribe

Jobs & Careers

Popular Articles