[Ashwini Sinha]

The magnetometer will show the data in degree from magnetic north of earth. Put the IndusBoard on flat surface and rotate it you will ge a 0 degree point that is north of Indusboard

[Ashwini Sinha]

For weather balloon you might also need the Long range RF communication module Either LoRA or SIM800l using celleluar network

[Ashwini Sinha]

For weather balloon you might also need the Long range RF communication module Either LoRA or SIM800l using celleluar network

[Ashwini Sinha]

You can participate in the EFY design contest by filling the forum at this link. Fill up your details paste the link of your document for submission.
https://www.electronicsforu.com/electronics-for-you-design-contest

[Ashwini Sinha]

The project is for the raspberry pi board you need to download the Raspbian os on pc and flash the PI board with that image. ON phone you can download linux, but yes you can run python basic code using compiler and virtual cloud environments

[Ashwini Sinha]

You can do a hack here make a DIY circuit that has the code and IR led to control the DEVICES and add Bluetooth to it now make an app you can send a command over Bluetooth from another room and control the tv and other appliances

[Ashwini Sinha]

You can do a hack here make a DIY circuit that has the code and IR led to control the DEVICES and add Bluetooth to it now make an app you can send a command over Bluetooth from another room and control the tv and other appliances

[Ashwini Sinha]

How can I setup raspberry pi first time without any display . Headless setup of

[Ashwini Sinha]

How can I setup raspberry pi first time without any display . Headless setup of

[Ashwini Sinha]

L298N gives digital 1 and zero while the servo motor drive on the PWM signal so technically it’s hard o do. But you can try hardware to hack here open the servo and disconnect the servo motor PWM driver circuit and then connect the servo motor terminals directly to L298N motor output

[Ashwini Sinha]

L298N gives digital 1 and zero while the servo motor drive on the PWM signal so technically it’s hard o do. But you can try hardware to hack here open the servo and disconnect the servo motor PWM driver circuit and then connect the servo motor terminals directly to L298N motor output

[Ashwini Sinha]

L298N gives digital 1 and zero while the servo motor drive on the PWM signal so technically it’s hard o do. But you can try hardware to hack here open the servo and disconnect the servo motor PWM driver circuit and then connect the servo motor terminals directly to L298N motor output

[Ashwini Sinha]

L298N gives digital 1 and zero while the servo motor drive on the PWM signal so technically it’s hard o do. But you can try hardware to hack here open the servo and disconnect the servo motor PWM driver circuit and then connect the servo motor terminals directly to L298N motor output

[Ashwini Sinha]

L298N gives digital 1 and zero while the servo motor drive on the PWM signal so technically it’s hard o do. But you can try hardware to hack here open the servo and disconnect the servo motor PWM driver circuit and then connect the servo motor terminals directly to L298N motor output

[Ashwini Sinha]

Yes, now Arduino IDE supports RPI Pico. You can add Raspberry pi pico to IDE from add boards section

[Author]

Posts