A GSM module or a GPRS module is a chip or circuit that is used to establish communication between a mobile device or a computing machine and a GSM or GPRS system.
Table of Contents
What is GSM?
GSM (Global System for Mobile Communications, originally Groupe Spécial Mobile), is a standard developed by the European Telecommunications Standards Institute (ETSI).
It was created to describe the protocols for second-generation (2G) digital cellular networks used by mobile phones and is now the default global standard for mobile communications – with over 90% market share, operating in over 219 countries and territories.
What is GPRS?
General Packet Radio Service (GPRS) is a packet-oriented mobile data service on the 2G and 3G cellular communication system’s global system for mobile communications (GSM).
GPRS was originally standardized by European Telecommunications Standards Institute (ETSI) in response to the earlier CDPD and i-mode packet-switched cellular technologies. It is now maintained by the 3rd Generation Partnership Project (3GPP).
What is GSM Module?
GSM module or a GPRS module is a chip or circuit that will be used to establish communication between a mobile device or a computing machine and a GSM or GPRS system. The modem (modulator-demodulator) is a critical part here.
These modules consist of a GSM module or GPRS modem powered by a power supply circuit and communication interfaces (like RS-232, USB 2.0, and others) for computers.
A GSM modem can be a dedicated modem device with a serial, USB, or Bluetooth connection, or it can be a mobile phone that provides GSM modem capabilities.
Difference between GSM/GPRS Modems, Modules, and Mobiles
A GSM module or GPRS modules are similar to modems, but there’s one difference: A GSM/GPRS Modem is external equipment, whereas the GSM/GPRS module is a module that can be integrated within the equipment. It is an embedded piece of hardware.
A GSM mobile, on the other hand, is a complete system in itself with embedded processors that are dedicated to providing an interface between the user and the mobile network.
Understanding Modems
Wireless modems generate, transmit or decode data from a cellular network, in order to establish communication.
A GSM/GPRS modem is a class of wireless modems, designed for communication over the GSM and GPRS network. It requires a SIM (Subscriber Identity Module) card just like mobile phones to activate communication with the network. Also, they have IMEI (International Mobile Equipment Identity) numbers similar to mobile phones for their identification.
- The MODEM needs AT commands, for interacting with the processor or controller, which are communicated through serial communication.
- These commands are sent by the controller/processor.
- The MODEM sends back a result after it receives a command.
- Different AT commands supported by the MODEM can be sent by the processor/controller/computer to interact with the GSM and GPRS cellular network.
Functions of Modem
- Read, write and delete SMS messages.
- Send SMS messages.
- Monitor the signal strength.
- Monitor the charging status and charge level of the battery.
- Read, write and search phone book entries.
What is a Mobile Station?
A mobile phone and Subscriber Identity Module (SIM) together form a mobile station. It is the user equipment that communicates with the mobile network. A mobile phone comprises Mobile Termination, Terminal Equipment, and Terminal Adapter.
Mobile Termination is interfaced with the GSM mobile network and is controlled by a baseband processor. It handles access to SIM, speech encoding and decoding, signaling, and other network-related tasks.
Terminal Equipment is an application processor that deals with handling operations related to keypads, screens, phone memory, and other hardware and software services embedded into the handset.
The Terminal Adapter establishes communication between the Terminal Equipment and the Mobile Termination using AT commands. The communication with the network in a GSM/GPRS mobile is carried out by the baseband processor.
Applications of GSM Module or GPRS Module
The GSM/GPRS module demonstrates the use of AT commands. They can feature all the functionalities of a mobile phone through a computer like making and receiving calls, SMS, MMS, etc. These are mainly employed for computer-based SMS and MMS services.
GSM Example: Sending SMS using GSM
What is AT Command?
They are known as AT commands because every command line starts with “AT” or “at”. AT commands are instructions used to control a modem. AT is the abbreviation of ATtention.
GSM/GPRS modems and mobile phones support an AT command set that is specific to the GSM technology, which includes SMS-related commands like AT+CMGS (Send SMS message), AT+CMSS (Send SMS message from storage), AT+CMGL (List SMS messages) and AT+CMGR (Read SMS messages).
Note that the starting “AT” is the prefix that informs the modem about the start of a command line. It is not part of the AT command name.
For example, D is the actual AT command name in ATD and +CMGS is the actual AT command name in AT+CMGS. However, some books and websites use them interchangeably as the name of an AT command.
Tasks that can be done by AT Commands
Tasks that can be performed using AT commands include:
- Get basic information about the mobile phone or GSM/GPRS modem. For example, the name of the manufacturer (AT+CGMI), model number (AT+CGMM), IMEI number (International Mobile Equipment Identity) (AT+CGSN), and software version (AT+CGMR).
- Get basic information about the subscriber. For example, MSISDN (AT+CNUM) and IMSI number (International Mobile Subscriber Identity) (AT+CIMI).
- Get the current status of the mobile phone or GSM/GPRS modem. For example, mobile phone activity status (AT+CPAS), mobile network registration status (AT+CREG), radio signal strength (AT+CSQ), battery charge level, and battery charging status (AT+CBC).
- Establish a data connection or voice connection to a remote modem (ATD, ATA, etc).
- Send and receive a fax (ATD, ATA, AT+F*).
- Send (AT+CMGS, AT+CMSS), read (AT+CMGR, AT+CMGL), write (AT+CMGW) or delete (AT+CMGD) SMS messages and obtain notifications of newly received SMS messages (AT+CNMI).
- Read (AT+CPBR), write (AT+CPBW) or search (AT+CPBF) phonebook entries.
- Perform security-related tasks, such as opening or closing facility locks (AT+CLCK), checking whether a facility is locked (AT+CLCK), and changing passwords (AT+CPWD).
(Facility lock examples: SIM lock [a password must be given to the SIM card every time the mobile phone is switched on] and PH-SIM lock [a certain SIM card is associated with the mobile phone. To use other SIM cards with the mobile phone, a password must be entered.]) - Control the presentation of result codes/error messages of AT commands. For example, you can control whether to enable certain error messages (AT+CMEE) and whether error messages should be displayed in numeric format or verbose format (AT+CMEE=1 or AT+CMEE=2).
- Get or change the configurations of the mobile phone or GSM/GPRS modem. For example, change the GSM network (AT+COPS), bearer service type (AT+CBST), radio link protocol parameters (AT+CRLP), SMS center address (AT+CSCA), and storage of SMS messages (AT+CPMS).
- Save and restore configurations of the mobile phone or GSM/GPRS modem. For example, save (AT+CSAS) and restore (AT+CRES) settings related to SMS messaging such as the SMS center address.
Note:
Mobile phone manufacturers usually do not implement all AT commands, command parameters, and parameter values in their mobile phones.
Also, the behavior of the implemented AT commands may be different from that defined in the standard. In general, GSM/GPRS modems designed for wireless applications have better support of AT commands than ordinary mobile phones.
In addition, some AT commands require the support of mobile network operators. For example, SMS over GPRS can be enabled on some GPRS mobile phones and GPRS modems with the +CGSMS command (command name in text: Select Service for MO SMS Messages).
But if the mobile network operator does not support the transmission of SMS over GPRS, you cannot use this feature.
Interface a Mobile Phone with the Microsoft Windows Platform
Windows (XP and lower versions) comes with an application called HyperTerminal for data communication through the serial port of the computer. The interfacing of the GSM module or GPRS module with the serial port of the computer involves the following steps:
- Connect the RS-232 port of the GSM module with the serial port of the computer. Insert a SIM card in the module.
- Open HyperTerminal from Start -> All Programs -> Accessories -> Communications -> HyperTerminal.
- Enter a name for the connection and press OK.
- Now select the communication port (COM) at which the GSM module is connected.
- Create a new connection set on HyperTerminal. Set parameters, like baud rate as 9600, handshaking mode as none, parity bit as none, stop bit as 1, and data bit as 8.
GPS/GPRS-based Projects
This article was first published on 28 May 2016 and recently updated on October 2024.
Which one is able to intercept and receive atm or point of sale transaction? What software is needed to decrypted the transaction please?
i connected sim800l Module with Arduino, Recommended supply 3.3volts are given. But the signal was not connected i tried arduino Power supply with computer and 12 volts Adapter
where do we use these GPRS Modems? what are the functions of GPRS Modem? If Possible, please give some examples so that i can understand it better. Thank you.
Sory still i am comfunsing on how i can with mg mobile phone with microcontroller eg arduino via GSM module
Kindly elaborate your query.